SP 322 — Synthetic grease for concealed mechanisms
Precise delivery onto internal components.
General description:
SP 322 is a synthetic spray grease developed for the lubrication of internal mechanical movements.
The packaging is supplied with a flexible extension tube that allows precise application even where the standard nozzle cannot reach.
Formulated with fully synthetic hydrocarbon base oils and an aluminum complex thickener, SP 322 offers excellent load resistance, high antiwear properties, good water repellency and low base oil separation.
Its characteristics make it possible to significantly extend relubrication intervals and to operate over a wide temperature range.
It is used in SPII laboratories for the lubrication of the internal mechanisms of cab desk footboards.
The product provides safe operating conditions and does not corrode metals, insulating coatings, rubber, plastics or paints.
SP 322 is recommended for the lubrication of internal mechanisms in cab desk footboards, but it is also useful for plain or rolling bearings, guides, cams, slides and any mechanism that is difficult to reach.
Color
White
Appearance
Smooth
Operating temperature range
From -30°C to +150°C
Base oil type
PAO
Thickener type
Aluminum complex
NLGI consistency
2
Worked penetration at 20°C 60,000 cycles
265-295 dmm
Worked penetration at 20°C 100,000 cycles
280-295 dmm
Dropping point
Above 175°C
Base oil viscosity at 40°C
240 cSt
Apply SP 322 to the mechanical movements to be lubricated using either the standard nozzle or the supplied flexible extension tube, depending on the accessibility of the application point.
The product provides safe operating conditions and does not corrode metals, insulating coatings, rubber, plastics or paints. Store containers in a well-ventilated, cool, dry place protected against fire.
Keep away from flames and heat sources and do not spray onto incandescent or high-temperature surfaces.
Before use, verify by means of appropriate tests that the product is suitable for the specific application.
The product can be ordered in the following packaging:
400 ml spray – box of 12 pcs
