TS 341 — Non-toxic anti-drip adhesive lubricant
Stays in place even on open mechanisms
General description:
TS 341 is an anti-drip adhesive lubricating oil formulated for the maintenance and lubrication of machinery and systems in the food, pharmaceutical and refrigeration industries.
Its marked antiwear and EP properties also make it suitable for extreme conditions of load, high speed, washout, temperature and chemical attack.
Applied to open mechanisms, the product does not run or drip, has low evaporation losses and a low ash content.
It contains no solvents or compounds classified as hazardous.
TS 341 is recommended for the maintenance and lubrication of machinery and systems in the food, pharmaceutical, beverage, dairy, meat processing and refrigeration industries.
It is particularly suitable where a non-toxic adhesive lubricant is required that can operate under high loads, high speeds, washout, high temperatures and chemical attack. It can also be applied to open mechanisms, where it is important to keep the lubricant in place without run-off or dripping.
Color
Colorless
Odor
None
Base
Synthetic
Density at 20°C
0.836
Kinematic viscosity at 40°C
423 mm²/s
Kinematic viscosity at 100°C
115 mm²/s
Pour point
-10 °C
Flash point
> 260°C
Apply TS 341 to the parts to be lubricated according to the requirements of the system or component.
The product must be handled away from flames and heat sources and stored in ventilated areas protected against fire.
Before use, consult the safety data sheet.
The product can be ordered in the following packaging:
400 ml spray – box of 12 pcs
