TS 816 — Anaerobic gasket for rigid flanges
High-viscosity red sealant for flanged joints exposed to heat, vibration, and aggressive substances.
General description:
TS 816 is a thixotropic anaerobic gasket for metals, engineered to seal rigid flanged surfaces with large tolerances.
Once cured, it forms a seal resistant to temperatures up to 200°C, vibration, thermal shock, gas, oils, fuels, water/glycol, and air compressors.
It is particularly effective on gearboxes, transmissions, differentials, pumps, and engines, even under severe operating conditions.
Sealed parts remain removable using standard tools or localised heating.
TS 816 is recommended for:
Rigid metal flanged joints
Gearboxes, engines, differentials, and transmissions
Seals resistant to gas, oils, fuels, and water/glycol
Situations involving vibration and thermal shock
Do not use on plastics or elastomers without prior verification: the product may cause stress cracking.
Composition
Anaerobic methacrylate resin
Colour
Red
Viscosity at 25°C
50,000–300,000 mPa·s
Specific gravity
≈ 1.05 g/ml
Flash point
100°C+
Shelf life
1 year at 25°C (in original packaging)
Max. joint tolerance
0.50 mm
Handling time
15–30 minutes
Functional cure
3–6 hours
Full cure
6–12 hours
Shear strength (ISO 4587)
5–10 N/mm²
Tensile strength (ISO 6922)
6–8 N/mm²
Impact resistance (ASTM D950)
3–5 kJ/m²
Temperature resistance
−55°C / +200°C
Clean and degrease the surfaces thoroughly. Apply TS 816 in an amount sufficient to completely fill the joint. Assemble and allow to cure.
Handling time is 15–30 minutes, with functional cure in 3–6 hours.
Disassembly is facilitated by heating the joint to 150–250°C.
Remove cured residues mechanically and finish with acetone.
For safety information, refer to the Safety Data Sheet (SDS), available on request.
The product can be ordered in the following packaging:
75 ml squeeze bottle – box of 10 pcs
