TS 966 — Emulsifiable coolant oil
Turning, cutting, high-speed cut-off operations, milling and deep-hole drilling of metals
General description:
TS 966 is a multipurpose emulsifiable coolant oil developed for mechanical machining operations such as turning, cutting, high-speed cut-off operations, milling and deep-hole drilling, on widely used automatic and manual machines.
Its excellent stability and rust-preventive properties make it suitable for chip-removal machining on highly machinable metals, medium-alloy steels, nickel alloys, aluminum and yellow alloys.
The formulation contains newly developed antibacterial additives and compounds and is completely free from chlorine, sulfur, phosphorus, phenol, nitrites, boron and amides.
Used at high concentrations, TS 966 can also replace neat cutting oils.
TS 966 is suitable for mechanical machining operations such as turning, milling, drilling, boring, cutting and threading.
It can be used in single tanks and centralized systems.
It is compatible with medium-alloy steels, aluminum alloys, brass and yellow alloys, making it suitable for a wide range of machining operations on different metals.
Appearance
Liquid
Color
Dark brown
Odor
Slight
Density at 15°C
0.916
Viscosity at 50°C
12 Engler (90 cSt)
Flash point
Above 250 °C
pH of 3% emulsion
9.2 ± 0.5
Appearance of 3% emulsion
Milky white
Refractometer factor
1
Use TS 966 in emulsion according to the type of machining operation.
For turning, use concentrations from 4 to 6%.
For milling, use concentrations from 4 to 6%.
For drilling, use concentrations from 4 to 8%.
For boring, use concentrations from 5 to 15%.
For cutting, use concentrations from 3 to 5%.
For threading, use concentrations from 5 to 10%. The product is stable under normal conditions. Before use, consult the safety data sheet.
The product can be ordered in the following packaging:
1 Lt jerrycan
5 Lt can
